836 viewsremoving the lower coil sporing isolator from rear coil . Rusted but nowhere near as bad as front. Cleaned and sanded well and painted with POR.
|
|
836 viewsTaped and primed
|
|
836 viewsTaping it up to paint the trim black
|
|
835 viewsLooking down into the upper end of the slot canyon as Badger makes his way down the gut into the slot where I would soon join him.
|
|
835 viewsTaken 11-14-2015
|
|
835 viewsTaken 4-25-2017
|
|
835 viewsThe coil spring towers were extremely rusted out. I did not both with replacing these as I am not planning on doing hardcore off roading otherwise I would have cut those off and welded in a repair kit or fabricated something.
|
|
835 viewsAFTER !
|
|
834 viewsTaken 4-28-2017
|
|
834 viewsRubber isolators badly worn back there too
|
|
834 viewshere is height AFTER the lift and rims/tires. Between the 2.5 lift, new isolators and shocks, I managed to get a total of 6 inches of lift. (was 31 inches)
|
|
834 viewsGrinding the pinch weld back on driver side
|
|
834 viewsTyler after taking down another tree on the driveway.
|
|
833 viewsRAT Drone view looking down on Granny`s Kitchen falls
|
|
832 views
|
|
832 viewsTaken 11-21-2015
|
|
832 viewsTaken 12-5 2015
|
|
832 viewscleaned the panel
|
|
832 viewsCut the slits
|
|
831 viewsLower end of the slot canyon
|
|
831 viewsThe Bonas gorge above the Bonas Wall
|
|
831 views
|
|
831 views
|
|
831 views
|
|
| 13452 files on 561 page(s) |
 |
|
|
|
|
|
554 | |
|
|
|
|
|
