1004 viewsBadly worn and dry rotted rubber isolators and rusted frame towers Nov 14, 2026 at 07:40 PM
|
|
1409 viewsSubmitted by Bol'DarNov 14, 2026 at 07:38 PM
|
|
984 viewsLooking at the 120 foot oak tree the neighbor paid us to take down so it wouldn't hit his house. I am glad we did not drop it on the house !! Nov 14, 2026 at 07:38 PM
|
|
987 viewsinner fender working out well on pass side Nov 14, 2026 at 07:37 PM
|
|
1501 viewsSubmitted by Bol'DarNov 14, 2026 at 07:37 PM
|
|
924 viewsnew yoke installed on front diffNov 14, 2026 at 07:37 PM
|
|
983 viewsAdded some new fluid to the transfer case as well since you lose some when removing the yoke. Nov 14, 2026 at 07:37 PM
|
|
1026 viewsPainted with POR (since this one on driver side is so bad, I will install a coil spring retainer just for piece of mind) Nov 14, 2026 at 07:36 PM
|
|
2557 viewsHUGE Oak tree that fell and almost crushed our neighbors house. Tyler and I removed it for them. Nov 14, 2026 at 07:36 PM
|
|
926 viewsNo problem getting the first one in Nov 14, 2026 at 07:34 PM
|
|
1475 viewsSubmitted by Bol'DarNov 14, 2026 at 07:34 PM
|
|
1026 viewsFront part of pass side inner fender looking good after mounting to bumper coverNov 14, 2026 at 07:34 PM
|
|
983 viewsSide view. I would be grinding back the pinch weld quite a bit too. Nov 14, 2026 at 07:34 PM
|
|
1016 viewsI reused the cut pieces and riveted them back to the trimmed bumper corners so I would have a nice edge instead of a narrow cut one and a way to mount the inner fenders back to it. I would epoxy glue those later in this process for stability as those rivets would never last by themselves under off roading conditions. Nov 14, 2026 at 07:34 PM
|
|
1009 viewsnew rims /tires mounted . These are JK take offs and are 255/75.17 so the tires are 32.5 inches tall. Nov 14, 2026 at 07:32 PM
|
|
979 viewsNow I replaced the plastic bumper cover so I cut start cutting it. Nov 14, 2026 at 07:32 PM
|
|
950 viewsI dropped this 120 footer (Oak) at neighbors house. If not taken down it could have hit the house. (it got a blue fungus and died suddenly) Nov 14, 2026 at 07:32 PM
|
|
852 viewshere you can see just how high I jacked it up to eliminate so much prying and straining ! Nov 14, 2026 at 07:31 PM
|
|
1427 viewsdad's flowersNov 14, 2026 at 07:30 PM
|
|
937 viewsPinch weld ground back a lot Nov 14, 2026 at 07:29 PM
|
|
980 viewsA lot of digging to remove the old gutter drain pipe. Nov 14, 2026 at 07:29 PM
|
|
1583 viewsdad's flowersNov 14, 2026 at 07:29 PM
|
|
1039 viewsJacking up one side as far as it will go to give room to get the coil back in with new rubbers and the spacer. Nov 14, 2026 at 07:29 PM
|
|
977 viewsBumper cover removed as I begin the trimming of the front Nov 14, 2026 at 07:28 PM
|
|
| 268 files on 12 page(s) |
 |
3 | |
|
|
|
|
|
|
|
|
