 |
Last additions - 1999 Jeep WJ pics |
 |
|
1008 viewsAfter the first couple of coats of black trim paint. Plastic trim was in bad shape and had been painted before with a gray that was too light and was a shoddy job it was flaking off so a LOT of sanding had to be done to get it all off and prepped for some good paint done correctly. Mar 11, 2019
|
|
976 viewsAfter a couple of coats of good black trim paint WITH flex additiveMar 11, 2019
|
|
1022 viewsTaping it up to paint the trim black Mar 11, 2019
|
|
973 viewsTaping it up to paint the trim black Mar 11, 2019
|
|
951 viewsTaping it up to paint the trim black Mar 11, 2019
|
|
912 viewsTaping it up to paint the trim black Mar 11, 2019
|
|
953 viewsTaping it up to paint the trim black Mar 11, 2019
|
|
1001 viewsTaping it up to paint the trim black Mar 11, 2019
|
|
972 viewsAFTER ! Mar 11, 2019
|
|
972 viewsAFTER ! Mar 11, 2019
|
|
1073 viewsAFTER ! Mar 11, 2019
|
|
968 viewsAFTER !! Mar 11, 2019
|
|
933 viewsepoxy glue on pass side Mar 11, 2019
|
|
1068 viewspassenger side corner piece I made and riveted on, sanded and ready for epoxy Mar 11, 2019
|
|
934 viewsEpoxy applied to the driver side corner piece I made and riveted on Mar 11, 2019
|
|
945 viewsCoil spring retainer installed on driver side (remember that tower was rusted nearly gone ??) Just one less thing to worry about when going down the trail !! Mar 11, 2019
|
|
919 viewsDriver side inner fender mounted Mar 11, 2019
|
|
959 viewsDriver side inner fender remounted Mar 11, 2019
|
|
964 viewsFront after trimming Mar 11, 2019
|
|
957 viewsAFTER trimming bumper and fender Mar 11, 2019
|
|
926 viewsAFTER trimming the fender (I will trim that top part later after I see if I go with a bushwhacker flare OR if I do something custom) For now I have all the clearance i need and it doesnt look that bad but that will get trimmed eventually !!! Mar 11, 2019
|
|
1004 viewsAFTER trimming the fender (I will trim that top part later after I see if I go with a bushwhacker flare OR if I do something custom) For now I have all the clearance i need and it doesnt look that bad but that will get trimmed eventually !!! Mar 11, 2019
|
|
1065 viewsDoing away with those crappy factory lug nuts and replacing with Pro Comp off road ones. Mar 11, 2019
|
|
1022 viewsFront part of pass side inner fender looking good after mounting to bumper coverMar 11, 2019
|
|
|
|
