RATtreks.com - Images of RATventures

Home > Misc.

Last additions - Misc.
1020.jpg
4 viewsAfter the first couple of coats of black trim paint. Plastic trim was in bad shape and had been painted before with a gray that was too light and was a shoddy job it was flaking off so a LOT of sanding had to be done to get it all off and prepped for some good paint done correctly. Mar 11, 2019
1022.jpg
5 viewsAfter a couple of coats of good black trim paint WITH flex additiveMar 11, 2019
1008.jpg
5 viewsTaping it up to paint the trim black Mar 11, 2019
1007.jpg
5 viewsTaping it up to paint the trim black Mar 11, 2019
1005.jpg
5 viewsTaping it up to paint the trim black Mar 11, 2019
1004.jpg
6 viewsTaping it up to paint the trim black Mar 11, 2019
1003.jpg
5 viewsTaping it up to paint the trim black Mar 11, 2019
1002.jpg
6 viewsTaping it up to paint the trim black Mar 11, 2019
0998.jpg
6 viewsAFTER ! Mar 11, 2019
0997.jpg
6 viewsAFTER ! Mar 11, 2019
0993.jpg
7 viewsAFTER ! Mar 11, 2019
0992.jpg
6 viewsAFTER !! Mar 11, 2019
0974.jpg
5 viewsepoxy glue on pass side Mar 11, 2019
0973.jpg
5 viewspassenger side corner piece I made and riveted on, sanded and ready for epoxy Mar 11, 2019
0972.jpg
5 viewsEpoxy applied to the driver side corner piece I made and riveted on Mar 11, 2019
0957.jpg
6 viewsCoil spring retainer installed on driver side (remember that tower was rusted nearly gone ??) Just one less thing to worry about when going down the trail !! Mar 11, 2019
0953.jpg
5 viewsDriver side inner fender mounted Mar 11, 2019
0950.jpg
6 viewsDriver side inner fender remounted Mar 11, 2019
0946.jpg
5 viewsFront after trimming Mar 11, 2019
0949.jpg
7 viewsAFTER trimming bumper and fender Mar 11, 2019
0945.jpg
6 viewsAFTER trimming the fender (I will trim that top part later after I see if I go with a bushwhacker flare OR if I do something custom) For now I have all the clearance i need and it doesnt look that bad but that will get trimmed eventually !!! Mar 11, 2019
0943.jpg
8 viewsAFTER trimming the fender (I will trim that top part later after I see if I go with a bushwhacker flare OR if I do something custom) For now I have all the clearance i need and it doesnt look that bad but that will get trimmed eventually !!! Mar 11, 2019
0937.jpg
5 viewsDoing away with those crappy factory lug nuts and replacing with Pro Comp off road ones. Mar 11, 2019
0935.jpg
6 viewsFront part of pass side inner fender looking good after mounting to bumper coverMar 11, 2019
215 files on 9 page(s) 2